Squeak-Stop is a dry-to-touch, anti-squeak lubricant designed to eliminate squeaks, rattles, and friction noise in automotive interiors and industrial assemblies. Its hydrocarbon based formula provides long-lasting lubrication without dripping, staining, or odors.
Squeak-Stop is a wet lubricant formulated as a multi-surface paste for permanent noise suppression on contacting surfaces. Its blend of hydrocarbons and mineral waxes form a durable thin-film barrier that reduces friction and eliminates the micro-movement responsible for squeaks and rattles on vinyl, metal, glass, and a wide variety of plastics.
Available Size: 1.75 oz. tin
Appearance: Soft, neutral paste; colorless and odorless
Odor: Pleasant, nontoxic
MeltPoint: 120°F (49°C)
SpecificGravity: 0.89 (at 70°F /21°C)
Application Method: Thin film by cloth, sponge, or brush
ApplicationRate：15 mg per square inch of contacting surface
Compatible Substrates: Vinyl, metal, glass, polypropylene, polyethylene, nylon, polyester, acetal
ShelfLife: Unlimited (no loss of effectiveness instorage)
Toxicity：Non-toxic,non-corrosive, non-staining
Washability: Washable with soap and water
Performance, Advantages and Benefits
Long-Lasting Thin-FilmLubrication
Squeak-Stop forms a durable lubricant film on contacting surfaces that resists displacement under normal service loads, providing sustained noise suppression without re-application.
Broad Substrate Compatibility
The formula is inert to a wide range of plastics and finishes including polypropylene, polyethylene, nylon, polyester, and acetal, making it suitable for modern automotive interior materials without risk of surface degradation or staining.
Clean and Safe to Handle
Squeak-Stop is non-toxic,non-corrosive, and free of harsh solvents or odors. The paste texture does not drip or migrate from the application area, and any excess is removed with a clean, dry cloth. The formula washes off with soap and water.
Unlimited Shelf Life
Unlike solvent-based lubricants subject to evaporation or polymerization, Squeak-Stop retains its physical properties and lubrication effectiveness indefinitely in storage, eliminating waste from product expiry.
Simple Application Protocol
A single application of 15 mg per square inch, applied with a cloth, sponge, or brush to the contacting surfaces, is sufficient for noise elimination. No mixing, drying time, or curing is required before reassembly.
What typeof surface is Squeak-Stopcompatible with?
Squeak-Stop is compatible with vinyl, metal, glass, and a broad range of plastic substrates including polypropylene, polyethylene, nylon, polyester, and acetal. It is formulated to be inert to these materials and will not cause surface swelling, crazing, or staining.
How is Squeak-Stop applied?
Apply a thin film of Squeak-Stop between the two contacting surfaces using a cloth, sponge, or fingertip. The recommended application rate is 15 mg of product per square inch of contacting surface. Remove any excess with a clean, dry cloth. No curing time is required.
Is Squeak-Stop safe for usein passenger vehicle interiors?
Yes. Squeak-Stop is non-toxic, non-corrosive, and emits no harsh odors. The formula is safe for use in enclosed spaces such as vehicle interiors and is washable with soap and water if contact with skin or surfaces occurs.
Does Squeak-Stop expire?
No. Squeak-Stop has an unlimited shelf life and does not lose its lubricating effectiveness in storage. The product does not contain solvents that evaporate or reactive chemistries that degrade over time.
Can Squeak-Stop be used onsurfaces that will be exposed to high temperatures?
Squeak-Stop has a melt point of 120°F (49°C). It is intended for use in standard automotive interior environments where surface temperatures remain below this threshold. It is not recommended for use in high-temperature under-hood or exhaust-adjacent applications.
.png)
.svg)
