Tectorius Tec-Bond® 235 and Tec-Bond® 251 may replace 3M™ Fastener Adhesive 2353 and 3M™ Fastener Adhesive 2510, respectively.
Tectorius Tec-Bond® P Series (P30, P80, & P85) may take the place of Precote®30, Precote®80, and Precote®85, respectively.
The Tec-Bond® pre-applied family of fastener adhesives and threadlockers contain microencapsulated reactive elements that are suspended in a quick-curing resin, and carried in a solvent or water medium, depending on formula.
Tec-Bond can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes and require no heat or primers for curing.
The shearing forces caused by installation of the fastener to the mating part release reactive compounds that cure into a tough, well bonded polymer. The resulting matrix rapidly bonds the surfaces, semi-permanently locking parts together and sealing leak paths.
Tectorius® and Tec-Bond® are registered trademarks of Maelstrom Chemical Technologies, LLC. All rights reserved. 3M™ and Scotch-Grip™ are trademarks of 3M Corporation. Precote® is a registered trademark of omniTECHNIK.