Tec-Bond® P-Series Pre-Applied Fastener Adhesives and Threadlockers
Tectorius Tec-Bond® P Series (P30, P80, & P85) may take the place of Precote® 30, Precote® 80, and Precote® 85, respectively.
The Tec-Bond® pre-applied family of fastener adhesives and threadlockers contain microencapsulated reactive elements that are suspended in a quick-curing resin, and carried in a solvent or water medium, depending on formula.
Tec-Bond can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes and require no heat or primers for curing.
The shearing forces caused by installation of the fastener to the mating part release reactive compounds that cure into a tough, well bonded polymer. The resulting matrix rapidly bonds the surfaces, semi-permanently locking parts together and sealing leak paths.
Tectorius® and Tec-Bond® are registered trademarks of Maelstrom Chemical Technologies, LLC. All rights reserved. Precote® is a registered trademark of omniTECHNIK Mikroverkapselungs GmbH, Germany. omniTECHNIK Mikroverkapselungs GmbH is part of the SurTec Group.
DESCRIPTION:
The Tec-Bond® P-Series of thread locking products are room-temperature curing, microencapsulated adhesives. They can be applied to male or female threaded fasteners of virtually all sizes, configurations, compositions and finishes.
Tec-Bond P-Series contains a microencapsulated, reactive element that is suspended in a quick-curing, solvent borne resin. The shearing forces caused by installation of the fastener to the mating part release the activator to allow curing of the resin matrix. The resulting chemical reaction rapidly bonds the surfaces, locking parts together and sealing leak paths.
Tec-Bond products offer consistent and predictable torque values, and require no heat or primers for curing.
PRODUCT FEATURES:
» Unaffected By Automotive Fluids: These materials resist and seal against most automotive fluids including oil, water, antifreeze, and gasoline.
» Variety of Strengths, Colors, & Viscosities: This product is available in a variety of colors (custom colors available) for easy part inspection. Different strengths and properties are available to fit the desired application.
» Fast Fixture Times: Under typical conditions, fixture is achieved within 15 minutes.
» High Temperature & Torque-Sensitive Formulas: The P-Series includes grades that are specifically intended for use in high temperature settings or tension-sensitive applications.
» Saves Money: Tec-Bond products save valuable time and are less expensive than applying bottled thread locking compounds at the point of assembly.
» Suitable for Production Coating: Each grade of the P-Series is available in viscosities suitable for use on a broad range of production coating equipment.
AVAILABLE GRADES:
GRADE:
P-30
P-80
P-85
COLOR:
Yellow
Pink
Turquoise
PRIMARY USAGE:
Low Strength
Hi Strength, Hi Temp
Medium Strength, Torque Control
BREAK/PREVAIL TORQUE AFTER FULL CURE (in./lbs):
80/50
265/200
180/100
(Nm):
9/14
30/34
30/34
TEMPERATURE RANGE (°F):
-58/300
-58/392
-58/392
TEMPERATURE RANGE (°C):
-50/150
-50/200
-50/200
LUBRICITY:
Medium
High
High
VISCOSITY cPs:
300-4000
300-4000
300-4000
Torques based on 3/8"-16 dry phosphated bolts and nuts.
SPECIFICATIONS:
Installation Torque (in/lbs):
<10
Fixture Time:
<1 hour
On-Part Life *:
1 year
Full Cure Time @ Room Temperature:
<72 hours
*Varies due to storage conditions